NOVOMED

Digital Philips Goldway GS20 Multipara Patient Monitor, Screen Size: 10.4 Inch

Specifications
ECG
Lead type	3-lead or 5-lead selectable
Lead selection, 3-lead	I, II, III
Lead selection, 5-lead	I, II, III, aVR, aVL, aVF, V
HR measurement	Adult / pediatric: 15 bpm – 300 bpm Neonatal: 15 bpm – 300 bpm Step: 1 bpm
HR accuracy	±5 bpm or ±1 %, whichever is greater
Arrhythmia	21 calls
ST measurement range	-2.5 mV – +2.5 mV
Waveform speed	6.25 mm/s,12.5 mm/s, 25 mm/s, 50 mm/s
Gain selection	x 1/4, x 1/2, x 1, x 2, x 4, Auto
Pacemaker detection	Yes
Protection	Against electrosurgical interference and defibrillation
Non-invasive blood pressure (NBP)
Method	Automatic oscillometric
Parameters	SYS/DIA/MAP/Pulse Rate
Operating mode	Manual/Auto/STAT
Auto measure intervals	3, 5, 10, 15, 30, 60, 90, 120, 240, 480 minutes
Units	mmHg/kPa
Cuff pressure range, adult / pediatric	0 – 300 mmHg ( 0 kPa – 40.0 kPa)
Cuff pressure range, neonate	0 – 150 mmHg ( 0 kPa – 20.0 kPa)
Systolic measurement range, adult/ pediatric	30 mmHg – 254 mmHg (4.0 kPa – 33.9 kPa)
Systolic measurement range, neonate	30 mmHg – 135 mmHg (4.0 kPa – 18.0 kPa)
Diastolic measurement range, adult / pediatric	10 mmHg – 220 mmHg (1.3 kPa – 29.3 kPa)
Diastolic measurement range, neonate	10 mmHg – 110 mmHg (1.3 kPa – 14.7 kPa)
MAP measurement range, adult / pediatric	20 mmHg – 235 mmHg (2.7 kPa – 31.3 kPa)
MAP measurement range, neonate	20 mmHg – 125mmHg (2.7 kPa – 16.7kPa)
Accuracy, maximum standard deviation	8 mmHg (1.1 kPa)
Accuracy, mean error	±5 mmHg (±0.7 kPa)
Pulse rate range	40 bpm – 240 bpm
Pulse rate accuracy	±5bpm or ±5%, whichever is greater
SpO2 (Philips SpO2 technology)
Measurement range	0 – 100 %
Accuracy	70 % – 100 %, depends on sensor; 0 – 69 %, unspecified
Waveform speed	6.25 mm/s, 12.5 mm/s, 25 mm/s, 50 mm/s
Pulse rate range	30 bpm – 300 bpm
Pulse rate accuracy	±2 bpm or ±2%, whichever is greater
Perfusion index	Yes
Respiration (RESP)
Measurement method	Thoracic impedance
Measurement range	0 rpm – 150 rpm
Accuracy	0rpm – 120rpm: ±1 rpm; 121rpm – 150rpm: ±2 rpm
Waveform speed	6.25 mm/s,12.5 mm/s, 25 mm/s, 50 mm/s Accuracy undefined
Gain selection	x 1/2, x 1, x 2
Apnea alarm	Yes, 10 – 60 s
Work mode	Auto or manual (threshold)
RESP lead	RA-LL
Temperature (TEMP, 2-channel)
Measurement range	0 – 50℃ (32℉ – 122℉)
Resolution	0.1℃ (0.2℉)
Accuracy	±0.1℃ (±0.2℉) (without sensor)
Units	℃ / ℉
Minimum measuring time	Attachable skin surface probe: less than 10 minutes Esophageal/rectal probe: less than 2 minutes
Capnopgraphy (etCO2, optional)
Method	Microstream, infrared absorption (Oridion)
Parameters	awRR, etCO₂, inCO₂
Measurement range	0 – 99 mmHg (0 kPa – 13.2 kPa)
Accuracy+C781, 0 – 38 mmHg (0 kPa – 5.1 kPa)	±2 mmHg (±0.28 kPa)
Accuracy, 39 mmHg – 99 mmHg (5.2 kPa – 13.2 kPa)	± (5% of reading + 0.08% for every 1 mmHg (0.13 kPa) above 38 mmHg (5.1kPa)
awRR range	0-150 rpm
awRR accuracy, 3 rpm – 70 rpm	±1 rpm
awRR accuracy, 71 rpm – 120 rpm	±2 rpm
awRR accuracy, 121 rpm – 150 rpm	±3 rpm
Invasive Blood Pressure
Accuracy	±4 mmHg (0.53 kPa) or ±4 % of reading, whichever is greater
Invasive blood pressure (IBP, 2-channel, optional)
Parameters	SYS/DIA/MAP/Pulse Rate
Measurement range	-50 – 400 mmHg (-6.6 kPa – 53.3 kPa)
Waveform speed	6.25 mm/s, 12.5 mm/s, 25 mm/s, 50 mm/s
Resolution	1 mmHg (0.13 kPa)
Units	mmHg/kPa/cmH₂O
Transducer sensitivity	5 uV/V/mmHg
Pulse rate range	30 bpm – 254 bpm
Pulse rate accuracy	±2bpm or ±2%, whichever is greater
Sampling rate	62.5 samples per second
Recorder (optional)
Type	Built-in thermal recorder, 3 channels
Print mode	Real-time recording, timed recording, alarm-activated recording
Print speed	Auto, 12.5 mm/s, 25 mm/s, 50 mm/s
Display
Type	Color TFT LCD, 4:3
Size	10.4+611:631″
Resolution	800 x 600 pixels
Channels	Max 11 channels (auto waveform channel height adjustment)
Power supply
AC power input	100 – 240 VAC, 50/60 Hz
Battery	Rechargeable Li-Ion battery Maximum 2.5 hour continuous monitoring (1 battery)
Weight and dimensions
Net weight	Approx. 3.5 kg without battery
Dimensions (w x d x h)	316 mm x 265 mm x 131 mm (12.5 in. x 10.5 in. x 5.2 in.)
Safety approval and quality system
Safety standard	IEC 60601-1-2:2014
Electromagnetic environment	IEC 60601-1-2:2000/A1:2014
Quality system	ISO9001 & ISO13485 certified CE marking according to the Council Directive 93/42/EEC
Water proof	IPX1
Data review and storage
Data review and storage	1600- NBP data, 1200 hr trend graph, 120 min full disclosure ECG 1, 200 – alarm & arrhythmia events
External interface (standard)
External interface	ECG analog output VGA output Nurse call LAN USB
Cardiac Output (optional)
Measurement method	Right heart thermodilution
Measurement range	0.1 l/min – 20.0 l/min
Measurement accuracy	±0.2 l/min or ±10 %, whichever is greater
Blood temperature range	27℃ – 43℃ (80.6℉ – 109.4℉)
Blood temperature accuracy	± 0.1℃
Injection temperature	0℃ – 27℃ (32℉ – 80.6℉)

DreamStation Auto BiPAP Machine By Philips Respironics

DreamStation Auto CPAP Machine By Philips Respironics

DreamStation Auto BiPAP Machine By Philips Respironics

DreamStation Auto BiPAP Machine By Philips

Respironics

Features:

Product Name	DreamStation Auto BiPAP
Brand	Philips
Model	C-Flex
Pressure Range	4 to 20 cm H2O
Electrical Requirements	100-240 VAC, 50-60 Hz
Ramp Time	0 to 45 min. (5-min. increments)
Mask Fit Check	Yes
Auto On/Off	Yes
Ramp Pressure	4 cm H2O to BiPAP Pressure (CPAP)
CPAP with Humidifier	11.69 x 7.59 x 3.3 inches
CPAP without Humidifier
	6.18 x 7.59 x 3.3 inches
Weight with Humidifier	4.37 pounds (including the power supply)

Weight without Humidifier	2.94 pounds
Filters	Reusable pollen; Disposable Ultra-fine
DC Power	Yes ( optional DC cable is required ) part #1120746
Device Set-up	LCD, control dial/push button
Data Storage Capacity	SD card > 1 year On-board<6 months
Bluetooth	Yes, Integrated Bluetooth
Humidifier	Heated humidification Fixed, Adaptive, Heated Tube modes; Heated tube(optional)
Altitude Compensation	Automatic
Humidification (optional)	Removable Heated Humidifier
Special Features	Color Screen,Daily progress feedback, Ambient light sensor, Opti-Start

DreamStation Auto CPAP Machine By Philips Respironics

DreamStation Auto CPAP Machine By Philips Respironics

DreamStation Auto CPAP Machine By Philips

Respironics

Fetures:

Product Name	DreamStation Auto CPAP
Brand	Philips
Model	DreamStation
Pressure Range	4 to 20 cm H2O
Electrical Requirements	100-240 VAC, 50-60 Hz
Ramp Time	0 to 45 min. (5-min. increments)
Mask Fit Check	Yes
Auto On/Off	Yes
Ramp Pressure	4 cm H2O to CPAP Pressure (CPAP)
CPAP with Humidifier	11.69 x 7.59 x 3.3 inches
CPAP without Humidifier
	6.18 x 7.59 x 3.3 inches
Weight with Humidifier	4.37 pounds (including the power supply)

Weight without Humidifier	2.94 pounds
Filters	Reusable pollen; Disposable Ultra-fine
DC Power	Yes ( optional DC cable is required ) part #1120746
Device Set-up	LCD, control dial/push button
Data Storage Capacity	SD card > 1 year On-board<6 months
Bluetooth	Yes, Integrated Bluetooth
Humidifier	Heated humidification Fixed, Adaptive, Heated Tube modes; Heated tube(optional)
Altitude Compensation	Automatic
Humidification (optional)	Removable Heated Humidifier
Special Features	Color Screen,Daily progress feedback, Ambient light sensor, Opti-Start

Injector- APOLLO RT APO100 Single Head (Japan)

Injector- APOLLO RT APO100 Single Head (Japan)

Injector- APOLLO RT APO100 Single Head (Japan)

Product Specification
Brand	Apollo RT
Place of Origin	Japan
Model	APO100
Flow Rate	.1-10 ml/s (.1ml/s increment)
Volume	1-2000 ml (1 ml increment)
Scan Delay	0-300 second
Phase Delay	0-300 second
Heating	Built in temperature control heating (38 degree +-3 degree)
Power Supply	100-220 V AC 50-6- Hz
Power Consumption	100 VA
Consumables	100/200 ml Syringe

APO 100 (Injector- Single head)- Its design is the perfect balance between features and user-friendliness, making APO 100 the best highly cost-effective choice for injector contrast media.

Accurate pressure sensor
Confirmation of safety key- Injection will only start after proper checking and after key is pressed. This will prevent undesired injection, in case start switch is activated.
Maximum memory-saving protocols
Waterproof Keys
Slow speed Keys- Slowly move backward & forward injector plunger. Used for air purging or confirming needle placement.
Heat Maintainer Built in- Keeps Contrast Media at convenient temperature.
Easy Operation.
Auto fill feature.
User Friendly Remote Console.
Easy to insert and removal of syringe.
Variable flow rate injection is available.
Monitoring of real time flow rate, pressure graph and injected volume.
Multi Injection mode for various needs.

Hospital Bed

LKL Hospital ICU/CCU Electrical Bed (Malaysia)

Hospital Bed

LKL Hospital ICU/CCU Electrical Bed (Malaysia)

LKL Hospital ICU/CCU Electrical Bed (Malaysia)

Product Specification
Brand	LKL
Place of Origin	Malaysia
Model	BA 9900/9000/8989-1
Back Rest	0-70 degree
Leg Rest	0-35 degree
Knee Rest	0-25 Degree
Trendelenburg & Reverse Trendelenburg	minus 15 to plus 15 Degree
Auto Contour	Built in temperature control heating (38 degree +-3 degree)
Cardiac Chair Position	100-220 V AC 50-6- Hz
Vascular Position	100 VA
Dimensions	2270(L) x 1080(W) x 480-780mm(H)
Safety Load Capacity	250 Kg

Technical Features

Scratch and chip-resistant steel construction finish of hard epoxy powder coating
PE Head & Foot boards with locking mechanism for easy attachment, removal and easy cleaning
Split PE safety side rails with one-hand operation
X-ray radio backrest Translucent base with X-ray cast tray
Perforated mattress base
Four high-quality 150 mm diameter German twin wheel with central locking system (free, steering and total brakes)
Hi-Lo, Backrest, Kneerest, Trendelenburg and Reverse Trendelenburg by electric motor
Control panel internally and externally embedded on the side rails of the backrest
Nurse lock and handheld nurse control at the foot end.
Nurse lock to lock out control buttons totally or individually
Nurse handheld control with CPR button to neutralize bed position during emergency
Quick CPR release lever to flatten the backrest on both sides of the bed
Auto contour function to prevent patients from slipping in the cardiac chair position
6 IV pole attachment provisions
4 monkey pull provisions
2 drainage bag holders
4 rotating pumbers in the corner
IV storage of the drip pole

NDS 19″/21″/24″/32″ Medical Grade Monitor/Display USA

NDS 19″/21″/24″/32″ Medical Grade Monitor/Display USA

NDS 19″ Medical Grade Display USA

Product Specification
Brand	NDS
Place of Origin	USA
Model	Endovue 19
Screen Size	19″ Diagonal
Resolution	1280×1024
Luminance	250 cd/m2
Weight	11.5 Kg
Number of colors	16.7 million
Response	18 ms
Latency	20 ms
Video Inputs	DVI-D, RGBS/VGA/YPBPR, S Video, Composite
Video Output	DVI-D
Weight	4.9 Kg
Gross Weight	7.7 Kg
Dimension	445x374x17 mm
Power Supply	100-220 V AC 50-6- Hz

Medical Image Visualization

The EndoVue ® series delivers high-end endoscopy display image performance at a price value. Designed and built for medical use, it is listed as FDA, TUV certified, and CE marked, providing patient safety, clinical performance, and durability in comparison to non-medical grade displays. The EndoVue display accommodates standard analog and digital high-definition Various medical imaging signals, including ultrasound, PACS, and patient monitoring of vital signs. Features include fanless cooling design to minimize the risk of airborne contaminants spreading within the sterile field, and industry-leading LED backlight technology to reduce power consumption.

Optimized for endoscopic applications
Excellent image quality
Multi-modal imaging capabilities
Low power consumption and fanless cooling
Robust and reliable
Minimum ownership costs

Endoscopy/Colonoscopy

Pentax Versa HD Endoscopy Machine

Endoscopy/Colonoscopy

Pentax Versa HD Endoscopy Machine

Pentax Versa HD Endoscopy Machine

Product Specification
Brand	Pentax
Place of Origin	Japan
Model	Varsa
Video Output	Y/C, DVI, RGB, SYNC, AV
Light Source	LED
Dimensions	452 x 167 x 146 mm
Weight	11.5 Kg
Color Tone Adjustment	“R”,”B” adjustment +-25 steps
Brightness adjustment	“Y” adjustment +-25 steps
Freeze, Save, Review	Available
Gain Control	Off, 1, 2, 3
Monitoring Mode	Average, Peak
White balance adjustment	Available
Voltage	100-140 VAC
Frequency	50-60 Hz

VERSA is a CMOS and LED-based PENTAX Medical High-Definition platform. We provide you with a complete HD solution for every budget with our custom-made peripheral devices and well-known PENTAX Medical sales and service infrastructure. If you are looking for a complete and convenient system to move that makes it easy to perform diagnostics and daily therapeutic procedures, then VERSA is your answer.

Improved diagnoses with HD

High-Definition image quality supported by an image enhancement algorithm for high contrast observation and vascularization of mucosal patterns.

VERSA is based on CMOS HD sensor technology and uses an integrated LED light source to ensure long-life and consistent performance. The technology helps minimize the cost of maintenance. The USB recording function of VERSA helps to reduce running costs as images can be digitally documented without the need for additional printing costs.

Reliable PENTAX Medical Service Infrastructure VERSA platform from PENTAX Medical comes with a comprehensive service offering, highlighting our commitment as a trusted after-sales partner. Our well-established service infrastructure is designed to minimize turn-around times and meet the highest standards of quality repair and service. Our guarantee program supports all repairs.

High-definition images VERSA Video Processor (EPK-V1500c) Equipped with the high-resolution image sensor and LED lighting technology, VERSA protects endoscopic color and displays high-quality images.

Specification
Brand	PHILIPS
Model	IntelliVue MX 430
Country of Origin	Germany
Display Size	12″ LCD
Resolution	1280 x 800
Basic Parameter	ECG, SPO2, NIBP
Temperature Range	0–40°C (32–104°F)
Humidity Range	15–95% Relative Humidity
Ingress Protection	IP21
Power Consumption	<70 W average
Weight	6.6 kg (14.6 lb)
Indicator	Alarm, ON, Error, External Power & Battery
USB 2.0 & RS232	Available
ETCO2	Optional
IBP	Optional
Cardiac Output (CO)	Optional

ECG/ETT/EEG

Philips PageWriter TC20 12 Channel ECG Machine

ECG/ETT/EEG

Philips PageWriter TC20 12 Channel ECG Machine

Philips PageWriter TC20 12 Channel ECG Machine

Specification
Brand	PHILIPS
Model	PageWriter TC20
Warranty	1 Year
Display	6.5″ Touch Screen
Resolution	640×480
Printing Resolution	200×500 dpi
Printing Paper Size	A4
Algorithm	DXL ECG
Interpretive Statement	More Than 600
Graphical ST Presentation	Available
Weight	8.6 Kg Including Battery

Mask

Philips Respironics Amara Full Face CPAP Mask

Mask

Philips Respironics Amara Full Face CPAP Mask

Philips Respironics Amara Full Face CPAP Mask

Product Name	Full Face Mask
Brand	Philips
Usage/Application	Hospital
Size	Small, Medium, Large
Material	Silicone
Color	Transparent
Storage Temperature	-20 to 60 Degree C
Minimum Order Quantity	1 Piece

Ventilator

Philips Respironics BiPAP A40 Portable Ventilator For Hospital / Home Use

Ventilator

Philips Respironics BiPAP A40 Portable Ventilator For Hospital / Home Use

Philips Respironics BiPAP A40 Portable Ventilator Made in USA

Specification

Product Name	Respironics Bipap Machine
Brand	Philips
Modes	AVAPS-AE mode
Usage/Application	Hospital
Model Name/Number	A40
Ventilation modes	CPAP, S, S/T, PC, T, AVAPS-AE,
Target tidal volume	200 – 1500 ML
Breath rate	0 – 40 bpm
Rise time	1(100ms) – 6 (600ms)
Humidification	System One humidity control and ‘Dry Box’ technology
Hybrid ventilation	AVAPS (Average Volume Assured Pressure Support)
AVAPS rate	0.5 to 5 cm H2O/min
Inspiratory time	0.5 to 3 sec
Alarms	Patient disconnection, apnea, low minute ventilation, low tidal volume, high respiratory rate
Monitoring	Pressure, tidal volume, minute ventilation, respiration rate, leak
Filters	Foam and optional ultra-fine
Data Management	EncorePro 2 and DirectView software Compatible with oximetry module, Advanced detection of residual respiratory events (Apnea/Hypopnea Index, Obstructed Airway Apnea, Clear Airway Apnea, Hypopnea, Periodic Breathing, RERA, Large Leak and Snore)
DC power source	12VDC, 5.0 A
External battery	24VDC, 4.2 A
Battery backup	11 hours at IPAP 15 / EPAP 4 cm H2O and 12 BPM
Noise level	30 dBa AT 10 cm water
IPAP	4-40cm H2O
EPAP	4-25 cm H2O
Battery backup	9hrs
Warranty	1 Years

Philips Respironics Remstar Auto CPAP With Humidification

Philips Respironics Remstar Auto CPAP With Humidification

Philips Respironics Remstar Auto CPAP With Humidification

Brand	Philips
Model Name	Remstar Auto
Country of Origin	USA
Certification	US FDA, CE
Product Features	1. Auto-dimming LED helps create a darker room for easy sleeping
	2. Compliance meter breathing detection
	Auto-Titrating – Pressure levels will
	3. automatically change throughout the night to reflect the patient’s needs.
	4. Includes the Respironics Performance Tubing
Dimensions	7 inches L x 5.5 inches W x 4 inches H
Product Weight	3 pounds
Warranty	One Year
Auto Altitude Adjustments	Automatic
Data Storage Capacity	Display: Compliance VIC, 7-and 30-Day Averages, SD Card: > 1 yr (daily details with flow waveforms) On-Board: up to 6 Months
Filters	Foam and Optional Ultra Fine
Manufacturer	Respironics
Mask Off Alert	Breathing Detection
Noise Level	2.6 to 4.2 Dependant on Patient Settings
Pressure	4-20cm H20
Ramp Time	0 to 45 min (5-minute increments)
Starting Ramp Pressure	4 to CPAP; Patient Adjustable

Features

Mode- Auto-Trial for flexible delivery

Auto-Trial mode provides auto-CPAP breath-by-breath therapy for up to a total of 30 days after which the device automatically switches to CPAP-Check mode at the patient’s pressure at or below 90% of the trial period.

Heated tube- More flexibility and patient comfort

At the end of the Heated Tube, the System One device has a temperature sensor to deliver the selected moisture level to the patient while providing protection from a rainout. As a result, it is possible to achieve higher humidity levels for patients who might benefit from humidification.

CPAP check mode for optimal pressure

CPAP-Check mode checks whether the therapy pressure is optimal on the user every 30 hours. If not optimal, the nightly fixed CPAP pressure is automatically adjusted by 1 cm H2O to obtain the ideal pressure.

Opti Start for customized pressure

Opti-Start improves auto-CPAP therapy with a customized starting pressure.

Configurable PSmin

Adjustable PSmin offers additional options to clinicians for patients requiring bi-level auto-therapy.

Allies in Better Sleep and Breathing for Superior care

System One is an example of how we remain committed to working with care teams in harmony to create solutions that can lead to healthier patients, healthier practices and healthier businesses. Our partnership is called Better Sleep and Breathing Allies.

What In The Box:

CPAP
Caring case
Breathing Tube
Nasal mask
Power Adaptor